|
If
this occurs
|
Perform
these steps
|
|
? Recorder appears not to function at all. |
 |
Make
sure POWER switch is in the ô|ö (ON) position. |
|
| |
|
Make
sure the ac adaptor is securely plugged into the wall and
into the power jack on the recorder. |
|
| |
|
If
using fresh batteries, make sure they are inserted correctly. |
|
| |
|
If
using old batteries, replace with a fresh set of alkaline
batteries. |
|
| ?
Chart paper appears not to turn, or to turn at the wrong speed.
|
|
Make
sure the magnetic chart knob is in place. |
|
| |
|
Make
sure the ôCHART TYPEö 1/7/32 switch is in the correct position. |
|
|
? The pens do not appear to be leaving traces on the paper. |
|
Make
sure the door is completely closed and the latch button is
in the uppermost position. It may be necessary to squeeze
the case slightly to close the latch com-pletely. |
|
| |
|
Check
that the pens are locked firmly in position in their holders. |
|
| |
|
Make
sure pen caps are removed (and secured on the cap posts as
recommended). |
|
|
? donÆt light. |
|
Bulbs
are blown. Replace them with new bulbs. Bulbs |
|
| |
|
The
chart recorder is operating off batteries. Switch over to
ac power if you wish to light up the paper. |
|
Home
TOC 
Back 
Next